Skip to content

Inventory Clearance Sale Going On Now Shop Now

2005-15 Toyota Tacoma and 07-09 FJ Cruiser WITH E-Locker Nitro Gear Package
2005-15 Toyota Tacoma and 07-09 FJ Cruiser WITH E-Locker Nitro Gear Package
Nitro Gear & Axle

2005-15 Toyota Tacoma and 07-09 FJ Cruiser WITH E-Locker Nitro Gear Package

SKU: GPFJCRUISER-SELECT-2
$1,248.45
2005-15 Toyota Tacoma and 07-09 FJ Cruiser WITH E-Locker Nitro Gear Package
2005-15 Toyota Tacoma and 07-09 FJ Cruiser WITH E-Locker Nitro Gear Package
8" Toyota
OEM E-Locker
Nitro Front & Rear Gear Package Kit
Fits:
2007-2009 Toyota FJ Cruiser with OEM rear E-locker
(All manual transmission models have OEM 3.90 ratio, see *Note)

2005-2015 Toyota Tacoma with OEM rear E-locker
(4cyl models have 4.10 see *note)

2003-2008 Toyota Prado 120 Series with OEM rear E-locker
(check OEM ratio*)

2005-2015 Toyota Hilux with OEM rear E-locker
(check OEM ratio*)
Front Differential: Toyota 8" Rev. IFS Clamshell
Rear Differential: Toyota 8"
Gear Ratio: 4.10, 4.30, 4.56, 4.88 or 5.29
Manufacturer: Nitro Gear & Axle
Warranty: 2 Years


Tech Note:

*4.30 & 5.29 Use Standard Thickness Front Gearset and are designed to fit the OEM 3.90+ Carrier, models equipped with 3.73 or down will require NC-T8S-4 or ARB RD111.

*4.10, 4.56, 4.88 Use “Thick” Front Gearset and are designed to fit the OEM 3.73Carrier, models equipped with 3.91+ will require NC-T8S-3 or ARB RD121

*Carriers sold separately.

Gear Package Kit Includes:

Nitro front ring & pinion
Nitro front Master Install Kit
Nitro rear ring & pinion
Nitro rear Master Install Kit
Front solid pre-load spacer
Rear solid pre-load spacer


Suffering from poor performance and reduced fuel economy resulting from oversized tires?


A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires or extra weight to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting." This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

APPLICATION:

  • 2007-2009 Toyota FJ Cruiser with OEM rear E-locker (All manual transmission models have OEM 3.90 ratio, see *Note)
  • 2005-2015 Toyota Tacoma with OEM rear E-locker (4cyl models have 4.10 see *note)
  • 2003-2008 Toyota Prado 120 Series with OEM rear E-locker (check OEM ratio*)
  • 2005-2015 Toyota Hilux with OEM rear E-locker (check OEM ratio*)

  • Note: If your Toyota has OEM 3.90 or 4.10 gears a new carrier is required: TOY41311-35120 or ARB RD121

 

RECOMMENDED: Add 6 Quarts of 75W/140 Schaeffer Extreme Performance Full Synthetic Gear Lube

Friction is a killer to your moving parts. Our Para-Synthetic Plus is engineered to reduce friction with superior lubrication. Studies show it reduces your operating temperatures by up to 35%* and reducing wear as much as 25%*. Less friction means better fuel economy. There's nothing like it that will add miles to the adventure.

*Individual results may vary.

Tech note:
Jeeps, & 1/2 ton trucks/suv will require 2-3 qts for each differential whereas 3/4 ton and larger truck and SUV will typically require 3-4 qts per differential. Please check with your owner's manual to ensure proper amount of gear oil in your differential and follow manufacturer break-in procedures that usually require at least 4-6 quarts.

 

WARRANTY

All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.

8" Toyota
OEM E-Locker
Nitro Front & Rear Gear Package Kit
Fits:
2007-2009 Toyota FJ Cruiser with OEM rear E-locker
(All manual transmission models have OEM 3.90 ratio, see *Note)

2005-2015 Toyota Tacoma with OEM rear E-locker
(4cyl models have 4.10 see *note)

2003-2008 Toyota Prado 120 Series with OEM rear E-locker
(check OEM ratio*)

2005-2015 Toyota Hilux with OEM rear E-locker
(check OEM ratio*)
Front Differential: Toyota 8" Rev. IFS Clamshell
Rear Differential: Toyota 8"
Gear Ratio: 4.10, 4.30, 4.56, 4.88 or 5.29
Manufacturer: Nitro Gear & Axle
Warranty: 2 Years


Tech Note:

*4.30 & 5.29 Use Standard Thickness Front Gearset and are designed to fit the OEM 3.90+ Carrier, models equipped with 3.73 or down will require NC-T8S-4 or ARB RD111.

*4.10, 4.56, 4.88 Use “Thick” Front Gearset and are designed to fit the OEM 3.73Carrier, models equipped with 3.91+ will require NC-T8S-3 or ARB RD121

*Carriers sold separately.

Gear Package Kit Includes:

Nitro front ring & pinion
Nitro front Master Install Kit
Nitro rear ring & pinion
Nitro rear Master Install Kit
Front solid pre-load spacer
Rear solid pre-load spacer


Suffering from poor performance and reduced fuel economy resulting from oversized tires?


A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires or extra weight to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting." This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

APPLICATION:

  • 2007-2009 Toyota FJ Cruiser with OEM rear E-locker (All manual transmission models have OEM 3.90 ratio, see *Note)
  • 2005-2015 Toyota Tacoma with OEM rear E-locker (4cyl models have 4.10 see *note)
  • 2003-2008 Toyota Prado 120 Series with OEM rear E-locker (check OEM ratio*)
  • 2005-2015 Toyota Hilux with OEM rear E-locker (check OEM ratio*)

  • Note: If your Toyota has OEM 3.90 or 4.10 gears a new carrier is required: TOY41311-35120 or ARB RD121

 

RECOMMENDED: Add 6 Quarts of 75W/140 Schaeffer Extreme Performance Full Synthetic Gear Lube

Friction is a killer to your moving parts. Our Para-Synthetic Plus is engineered to reduce friction with superior lubrication. Studies show it reduces your operating temperatures by up to 35%* and reducing wear as much as 25%*. Less friction means better fuel economy. There's nothing like it that will add miles to the adventure.

*Individual results may vary.

Tech note:
Jeeps, & 1/2 ton trucks/suv will require 2-3 qts for each differential whereas 3/4 ton and larger truck and SUV will typically require 3-4 qts per differential. Please check with your owner's manual to ensure proper amount of gear oil in your differential and follow manufacturer break-in procedures that usually require at least 4-6 quarts.

 

WARRANTY

All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.


FAQs

Looking for your dream build?

Contact Us

My Cart

View Cart
You are $0.00 away from free shipping Congratulations, you've got free shipping!

Cart is empty