Skip to content
We are now open again at both locations. Our current hours in Issaquah are Mon - Fri, 8:30am - 5pm. Tualatin is Tue - Sat, 9-4.
We are now open again at both locations. Our current hours in Issaquah are Mon - Fri, 8:30am - 5pm. Tualatin is Tue - Sat, 9-4.

2013-2018 Dodge Ram 2500/3500 Nitro Gear Package

$1,391.25

Dodge Ram 2500/3500
Nitro Front & Rear Gear Package Kit, Select Ratio

Fits:
2013-2018 Dodge Ram 2500
2013-2018 Dodge Ram 3500


Front Differential: AAM 9.25", 12 bolt cover
Rear Differential: AAM 11.8"
Gear Ratio: 3.42, 3.73, 4.11,
4.30, 4.56, 4.88 or 5.13
Manufacturer: Nitro Gear & Axle
Warranty: 2 Years

 

Recommended:
6 quarts of Schaeffer's Full Synthetic Gear Lube 75W-140

Application:
2013-2018 Dodge Ram 2500/3500*
*Dual Rear Wheel models with Aisin Transmission require substituted rear install kit, please call or email for more info to info@dasmule.com

Gear Package Kit Includes:
Nitro front ring & pinion
Nitro front Master Install Kit
Nitro rear ring & pinion
Nitro rear Master Install Kit

Tech Notes:
2007 & newer Dodge 2500 & 3500 will still require MRG925A ring gear spacer with aftermarket air locker such as ARBRD197.
Nitro Master kits include name brand OE quality bearings.

 

Suffering from poor performance and reduced fuel economy resulting from over-sized tires?


A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting" - This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

Features:

  • 2 Year warranty*

    Nitro Rings & Pinions:
  • Manufactured in South Korea
  • 8620 Steel Gear Forgings
  • Precision Machining
  • CNC Triple-lapping
  • Heat Treatment
  • Rockwell Hardness Tested

    Nitro Master Install Kits:
  • Koyo or OEM Carrier Bearings
  • Koyo or OEM Pinion Bearings
  • Pinion Nut (if applicable)
  • Pinion Seal
  • Crush Sleeve or Preload Shims or Solid Spacer
  • Carrier Shims (if applicable)
  • Gasket or Silicone
  • Loctite
  • Gear-marking Compound and Applicator Brush

All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.