ARB HIGH PERFORMANCE TWIN PORTABLE COMPRESSOR 12V (CKMTP12)

ADDITIONAL FEATURES:

• Anti-vibration / sound deadening is integrated into the mount.
• Engineered, built and individually dyno-tested in Australia from local and imported components.
• Fully serviceable with all replacement parts available.

• Constructed primarily of light weight, high strength engineering grade materials, including military and aerospace 

  standard components.

• Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fiber piston seals for reduced friction and

  maximum trouble free life.
•  Built with sealed components for moisture and dust resistance.

• Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush 

  pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
• Compressor pistons are equipped with high shock rated roller bearing.
• High density and high flow washable sintered bronze air filter element.
• Motors are thermal cut-out protected against damage caused by extreme temperature use.

• Pressure switch and relay equipped electrical system prevents run-on when not filling, or any damage to 

  compressor or hoses as a result of the pressure generated from a kinked air line.

• Illuminated isolating switch is easy to see at night, and protects the user from hazardous sparking when 

  connecting the alligator clips to the battery terminals.

• Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in 

  case of a fault.

• Over-pressure safety valve equipped as a back-up protection from either pressure switch failure, thermal over 

  pressure generated in a hot vehicle  (i.e., no need to drain pressure when finished use.), or accidental connection to an external high pressure source.

• CE and C-Tick compliant.

CARRY CASE FEATURES:

After looking at the many cases available on the market, ARB Engineers decided that none met their exact requirements for the ARB Portable Twin Air compressor. The case needed to be compact, yet hold all accessories and air tank whilst also being extremely strong to handle the rigors of off roading and commercial use. Considerable time was therefore spent designing and testing a case that has features unique to ARB.

• Enlarged carry handle to suit a gloved hand.

• Enlarged latches to suit a gloved hand.

• Aluminum latches ensure that no compression set in the latches occurs over time and so we were able to reduce the clamping force (make them easier to unlatch) versus our competitors who all use plastic latches that will loosen up over time, and have subsequently needed to make their latches extra-extra uncomfortably tight when new to compensate.

• One piece heavy duty hinge.

• Shatterproof polymer compound (airport tested!)

• 2 sides are textured, logo’d, generally attractive – not just the top as with most other cases.

• Air travel equaliser valve to combat cabin pressure crush when landing.

• Water tight seal in lid.

• Volume of case will assure the portable CKMTP12 floats if dropped in water.

• Quick-change (removable) accessory pocket mounts.

• Slotted internal design to suit organisers/dividers (not included).