Teraflex JL/JLU 2” Front & Rear Bump Stop Strike Pad Kit
SKU: 1959500
The TeraFlex JL/JLU: 2” Bump Stop Strike Pad Extension Kit extends the reach of the factory bump stops on lifted JL/JLU Wrangler models to soak up energy during hard compression and suspension movement.
Combine with our JL/JLU: 0.5” Bump Stop Strike Pad Shim Kit(s) (# 1959300) to fine tune your strike pad height.
Fits:
• JL Wrangler (2-door)
• JLU Wrangler Unlimited (4-door)
Max Tire Size:
• Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops)
Max Tire Size w/ 0.5” Bump Stop Strike Pad Shim Kit(s) (# 1959300):
• Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
• Sport/Sahara Fenders: 37” (w/ 3.5” front & 4” rear bump stops)
• Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops)
• Aftermarket High Fenders: 39”+ (varies)
Includes:
• 2” front bump stop strike pads - pair
• 2” rear bump stop strike pads - pair
• Rear bump stop bracket mounting plate - pair
• Rear bump stop bracket mounting strap - pair
• All necessary hardware
Note(s):
• Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims in order to fit 35” tires. Requires 0.5” Front & Rear Bump Stop Strike Pad Shim Kit(s) (# 1959300) – NOT INCLUDED.
• Sport/Sahara Fenders require 3.5” front and 4” rear bump extension and shims in order to fit 37” tires. Requires two (2) 0.5” Front & Rear Bump Stop Strike Pad Shim Kits (# 1959300) – NOT INCLUDED.
• Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims in order to fit 37” tires. Requires 0.5” Front & Rear Bump Stop Strike Pad Shim Kit(s) (# 1959300) – NOT INCLUDED.
• Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims in order to fit 37” tires. Requires two (2) 0.5” Front & Rear Bump Stop Strike Pad Shim Kits (# 1959300) – NOT INCLUDED.
• Aftermarket High Fenders required to fit 39”+ tires. Bump extension and shim requirements will vary based on setup including wheel/tire combination, shock collapsed length, and fenders. Installer must check for clearances. We recommend two (2) 0.5” Front & Rear Bump Stop Strike Pad Shim Kits (# 1959300) – NOT INCLUDED.
The TeraFlex JL/JLU: 2” Bump Stop Strike Pad Extension Kit extends the reach of the factory bump stops on lifted JL/JLU Wrangler models to soak up energy during hard compression and suspension movement.
Combine with our JL/JLU: 0.5” Bump Stop Strike Pad Shim Kit(s) (# 1959300) to fine tune your strike pad height.
Fits:
• JL Wrangler (2-door)
• JLU Wrangler Unlimited (4-door)
Max Tire Size:
• Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops)
Max Tire Size w/ 0.5” Bump Stop Strike Pad Shim Kit(s) (# 1959300):
• Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
• Sport/Sahara Fenders: 37” (w/ 3.5” front & 4” rear bump stops)
• Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops)
• Aftermarket High Fenders: 39”+ (varies)
Includes:
• 2” front bump stop strike pads - pair
• 2” rear bump stop strike pads - pair
• Rear bump stop bracket mounting plate - pair
• Rear bump stop bracket mounting strap - pair
• All necessary hardware
Note(s):
• Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims in order to fit 35” tires. Requires 0.5” Front & Rear Bump Stop Strike Pad Shim Kit(s) (# 1959300) – NOT INCLUDED.
• Sport/Sahara Fenders require 3.5” front and 4” rear bump extension and shims in order to fit 37” tires. Requires two (2) 0.5” Front & Rear Bump Stop Strike Pad Shim Kits (# 1959300) – NOT INCLUDED.
• Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims in order to fit 37” tires. Requires 0.5” Front & Rear Bump Stop Strike Pad Shim Kit(s) (# 1959300) – NOT INCLUDED.
• Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims in order to fit 37” tires. Requires two (2) 0.5” Front & Rear Bump Stop Strike Pad Shim Kits (# 1959300) – NOT INCLUDED.
• Aftermarket High Fenders required to fit 39”+ tires. Bump extension and shim requirements will vary based on setup including wheel/tire combination, shock collapsed length, and fenders. Installer must check for clearances. We recommend two (2) 0.5” Front & Rear Bump Stop Strike Pad Shim Kits (# 1959300) – NOT INCLUDED.
FAQs
