C4 Fabrication
Tundra Overland Series Rear Bumper / 3rd Gen / 2022+
SKU: 1400-4222
$1,999.00
-
The 2022+ Tundra Overland Rear Bumper
- Main bumper structure made from 3/16b3 P&O steel.
- Bumper retains BSM (blind spot monitoring) functionality.
- Bumper retains parking sensors.
- Bumper requires cutting of the factory plastic bumper corners.
- Bumper mounting plates and brackets made from 1/4b3 P&O steel.
- All bumpers come with 3/4b3 thick D-Ring shackles fully welded inside and outside of the bumper.
- Bumper fits around OE hitch receiver so the official tow rating is retained.
- OE hitch receiver is not required to install bumper. Bumper can be installed without hitch in place to maximize ground clearance and departure angle.
- All rear bumpers come with supplied reverse lights that will replace factory reverse lights
- All rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2C3 SRM flush mount or Extreme LED 2C3 flush mount.
- License plate light included with bumper.
- Trailer wiring plug-in mounts next to license plate for easy access.
- Weight: 151 lbs
- NOT compatible with power rear bed step (must be relocated or removed)
- SHIPS BARE STEEL, powder coat finish not available. Product will need to be painted or powder coated to prevent rusting.
-
The 2022+ Tundra Overland Rear Bumper
- Main bumper structure made from 3/16b3 P&O steel.
- Bumper retains BSM (blind spot monitoring) functionality.
- Bumper retains parking sensors.
- Bumper requires cutting of the factory plastic bumper corners.
- Bumper mounting plates and brackets made from 1/4b3 P&O steel.
- All bumpers come with 3/4b3 thick D-Ring shackles fully welded inside and outside of the bumper.
- Bumper fits around OE hitch receiver so the official tow rating is retained.
- OE hitch receiver is not required to install bumper. Bumper can be installed without hitch in place to maximize ground clearance and departure angle.
- All rear bumpers come with supplied reverse lights that will replace factory reverse lights
- All rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2C3 SRM flush mount or Extreme LED 2C3 flush mount.
- License plate light included with bumper.
- Trailer wiring plug-in mounts next to license plate for easy access.
- Weight: 151 lbs
- NOT compatible with power rear bed step (must be relocated or removed)
- SHIPS BARE STEEL, powder coat finish not available. Product will need to be painted or powder coated to prevent rusting.
FAQs
