Skip to content
We are now open again at both locations. Our current hours in Issaquah are Mon - Fri, 8:30am - 5pm. Tualatin is Tue - Sat, 9-4.
We are now open again at both locations. Our current hours in Issaquah are Mon - Fri, 8:30am - 5pm. Tualatin is Tue - Sat, 9-4.

Four Wheel Camper Grandby Flatbed (For 8' Full Size Trucks)

$28,995.00

Available for in-store purchase only

Please contact us using the information at the bottom of this page if you're interested in purchasing.

The Grandby Flat Bed Model is designed to fit on the Full Sized trucks that have an 8' bed. For this camper model you will also need to have a Flat Bed Tray installed. The flatbed model we recommend is Norweld which can also be purchased and installed here at MULE. (Note: if you purchase a flatbed other than Norweld, please consult with us on camper compatibility).

Truck examples: Ford F-250/F350 w/ Long 8' Bed, Ram 2500/3500 w/ Long 8' Bed, & Chevy/GMC 2500/3500 w/ Long 8' Bed

The Grandby Flat Bed Model is only offered in one floor plan (shown below and in photos). This is a sample interior rendering. Siding, fabrics, and options can change depending on the final options you choose for your new camper.

Base Model Dry Weight 1395 lbs.
Height Down (including vent) 60"
Roof Length 160"
Floor Length 91"
Body Width 81"
Adult Sleeping 4
Fresh Water Capacity 20 Gallons
Extended Interior Height
6' 6"
Camper Framing

Welded Aluminum

 

Standard Features Included In Base Price

  • Mesa Exterior Siding in “White” (Standard on Flat Bed)
  • Standard “Jack Brackets”
  • Single 12 Volt Camper Battery (Deep Cycle w/ Separator)
  • Traditional Wood Grain Interior (flat bed)
  • Small 1.7 Cu.Ft. 3-Way Refrigerator (AC/DC/Propane)
  • Standard Sink & Stove (flat bed)
  • Screen Door
  • Welded Aluminum Frame Construction
  • Queen Cabover Bed w/ Mattress
  • 20 Gallon Fresh Water Tank
  • 2 Propane Tanks
  • Basic Roof Vent
  • LED Interior Lights & Exterior Porch Light

 Grandby Flatbed Spec Sheet

BUILD YOUR GRANDBY